Edgewall Software

Version 2 (modified by cmlenz, 17 years ago) (diff)

--

Configure Apache for multiple projects

By following these instructions, you will set up Apache to automatically serve multiple Trac projects for you. There are two different ways of setting this up: with and without global authentication. And with Apache 2 there are even two ways to do both.

Easiest method for hosting multiple projects in one domain with Apache 2

The first way to support multiple projects is to add the following to the Apache 2 config file, per project (myproj in this case):

ScriptAlias /myproj /path/to/trac.cgi

<Location "/myproj">
    SetEnv TRAC_ENV "/var/trac/myproj"
</Location>

<Location "/myproj/login">
    AuthType basic
    AuthName "myproj - trac"
    AuthUserFile "/var/svn/svn-auth-file"
    Require valid-user
</Location>

This is in addition to the global line:

Alias /trac "/usr/share/trac/htdocs"

If you want different users per project, just edit the AuthUserFile line for each one.

Harder method: URL Rewriting

In this case both ways use Apache's URL rewriting module : mod_rewrite. You have to make sure you have it loaded or compiled in Apache.

Apache 1.x

In 1.x versions of the Apache web server, you must uncomment the following line in the main Apache configuration file, generally found at /etc/apache/apache.conf or /etc/httpd/httpd.conf :

LoadModule rewrite_module modules/mod_rewrite.so

Apache 2.x

Newer versions of Apache (> 2.x) uses a cleaner configuration system. In the directory /etc/apache2/mods-available/ are all modules loading and configuration snippets available. In /etc/apache2/mods-enabled/ are all enabled modules. You just need to check that a symlink to the rewrite module loading file is present. If not, create it :

cd /etc/apache2/mods-enabled/
ln -s ../mods-available/rewrite.load .

Don't forget to check that the LoadModule line in this file (rewrite.load) is uncommented :

LoadModule rewrite_module /usr/lib/apache2/modules/mod_rewrite.so

This is Debian and Gentoo(?) specific. On SuSE you edit /etc/sysconfig/apache2 and add rewrite to APACHE_MODULES. Depending on your SuSE version you have to run "SuSEconfig --module apache2" or just "rcapache2 restart"

The wimp way for multiple projects

For those of using simply the cgi solution, the trac.cgi can be copied/symlinked to other directories

<Location "/cgi-bin/project1/trac.cgi">
        SetEnv TRAC_ENV "/home/trac/project1"
</Location>

<Location "/cgi-bin/project2/trac.cgi">
        SetEnv TRAC_ENV "/home/trac/project2"
</Location>

The same works also for the authentication:

<Location "/cgi-bin/project1/trac.cgi/login">
AuthType Basic
AuthName "Project1"
AuthUserFile /home/web/.access-files/trac.project1.htpasswd
Require valid-user
</Location>

<Location "/cgi-bin/project2/trac.cgi/login">
AuthType Basic
AuthName "Project2"
AuthUserFile /home/web/.access-files/trac.project2.htpasswd
Require valid-user
</Location>

Global authentication

This is the simplest case. With this procedure, you will be able to serve multiple Trac projects, using the same user accounts for every projects (permissions are still per project, but authentication is not). This is the original procedure provided by the Trac team.

Start out by creating a projects directory in your DocumentRoot (/var/www in this example). Projects will be accessed as http://hostname/projects/projectname. Copy (or symlink) trac.cgi to this projects/ directory together with a file named index.html. This will be shown when users try to access nonexistent projects.

Then create your Trac projects with trac-admin. It's important that they are all placed in the same directory. In this example we'll use /var/lib/trac. Add to your Apache configuration:

RewriteEngine on
RewriteRule ^/projects/+$			/projects/index.html [L]
RewriteCond /var/lib/trac/$1			-d
RewriteRule ^/projects/([[:alnum:]]+)(/?.*)	/projects/trac.cgi$2 [S=1,E=TRAC_ENV:/var/lib/trac/$1]
RewriteRule ^/projects/(.*)			/projects/index.html

Alias /trac/ /usr/share/trac/htdocs/
#or where you installed the trac htdocs

#You have to allow people to read the files in htdocs
<Directory "/usr/share/trac/htdocs">
        Options Indexes MultiViews
        AllowOverride None
        Order allow,deny
        Allow from all
</Directory>

<Directory "/var/www/projects">
	AllowOverride None
	Options ExecCGI -MultiViews +SymLinksIfOwnerMatch
	AddHandler cgi-script .cgi
	Order allow,deny
	Allow from all
</Directory>

<LocationMatch "/projects/[[:alnum:]]+/login">
	AuthType Basic
	AuthName "trac"
	AuthUserFile /path/to/trac.htpasswd
	Require valid-user
</LocationMatch>

Now, when you add another project, you don't need to edit any apache config. The only file you may want to edit is index.html to make it list the new project. If you think this is too much work, replace it with a python cgi script that does it for you.

tracd and TracModPython can also serve multiple projects.

Suggestion: In the second RewriteRule? directive and in the LocationMatch? directive, change [[:alnum:]] to [^/.] because while [[:alnum:]] only matches an alpha-numeric character, [^/.] matches any character that is not a slash or a dot. This change allows for, among other things, hyphens in project/directory names. It doesn't allow dots, because we don't want to match ".." for security reasons. Another possibility is to replace [[:alnum:]] with [[:alnum:]\-], which matches only an alphanumeric character or a hyphen (the backslash "escapes" the hyphen, which would otherwise have special meaning). The Apache 2.0 mod_rewrite documentation suggests referencing the Perl regular expression manual page (run perldoc perlre on a system where Perl is installed) for details on regular expressions. Note that it may be preferable to use a pattern that matches only characters suitable for directory names (and, thus, project names) that are valid for your particular installation.

Per-project authentication

As you problably noticed, the global procedure described above uses the same AuthUserFile, so every user you create in this file can log in every Trac project you host. Of course, in a non-configured Trac env, this user will be considered as anonymous, but you might not want this too. Using a per-project authentification also allows you to use a different authentification greater for each project.

The procedure we are going to explain here is a bit more complicated than the previous one as it imply Perl scripting, and that you'll need to reload the Apache configuration when you add a new project. But it's also much more tweakable.

Preparation

As for the first procedure, you'll need a projects directory into your DocumentRoot. Copy or symlink trac.cgi to this project :

mkdir projects
ln -s /usr/share/trac/cgi-bin/trac.cgi projects/trac.cgi

We will also use an index.cgi file (a Perl script) to list available projects. We will discuss its creation later. We will also take for granted that your Trac environments live in /var/lib/trac/.

Apache configuration

The begining is exactly the same than for the global authentification installation :

RewriteEngine On

RewriteRule ^/projects/+$                       /projects/index.cgi [L]
RewriteCond /var/lib/trac/$1                    -d

RewriteRule ^/projects/([[:alnum:]]+)(/?.*)     /projects/trac.cgi$2 [S=1,E=TRAC_ENV:/var/lib/trac/$1]
RewriteRule ^/projects/(.*)                     /projects/index.cgi

Alias /trac "/usr/share/trac/htdocs"
<Directory "/var/www/projects">
  AddHandler cgi-script .cgi
  Options Indexes MultiViews SymLinksIfOwnerMatch +ExecCGI
  AllowOverride None
  Order allow,deny
  Allow from all
</Directory>

But here comes the magic. For each directory found in /var/lib/trac/, we create the appropriate <Location> section in the Apache configuration, using an automated Perl loop(mod_perl is required). Paste in the following right after the <Directory> section in your Apache config file:

<Perl>
#!/usr/bin/perl

# trac environments location
my $trac_path = "/var/lib/trac";

# trac base url
my $trac_location = "/projects";

opendir(TRAC_ROOT, $trac_path) or die "Unable to open Trac root directory ($trac_path)";

while (my $name = readdir(TRAC_ROOT))
{
  if ($name =~ /^[[:alnum:]]+$/)
  {
    $Location{"$trac_location/$name/login"} = {
      AuthType => "Basic",
      AuthName => "\"Trac authentification for $name\"",
      AuthUserFile => "$trac_path/access.user",
      AuthGroupFile => "$trac_path/access.group",
      Require => "group $name",
    };
  }
}

closedir(TRAC_ROOT);

__END__
</Perl>

Auth files and project listing

In order to complete this setup, you will need two authentification files :

  • /var/lib/trac/access.user, an htpasswd file listing all user logins and passwords. You can of course use one file per project (use $trac_path/$name.htpasswd as AuthUserFile? for example).
  • /var/lib/trac/access.group, a group file, listing all authorized user per project, following this syntax :
    proj1: user1 user2
    proj2: user1 user3
    proj3: user4
    

For the project listing, we create another Perl script which will basically do the same as in the static Apache configuration above. Cut and paste the following into /projects/index.cgi:

#!/usr/bin/perl

use strict;

my $trac_path = "/var/lib/trac";
my $trac_location = "/projects";

# Send header
print "Content-Type: text/html\n\n";

# Send content
print "<html>\n";
print " <head>\n";
print "  <title>Project listing</title>\n";
print " </head>\n\n";
print " <body>\n";
print "   <h1>Project listing</h1>\n";
print "   <ul id=\"trac\">\n";

opendir(ROOT, $trac_path)
        or die "Unable to open root directory ($trac_path)";

while (my $name = readdir(ROOT))
{
  if ($name =~ /^[[:alnum:]]+$/)
  {
    print "   <li><a href=\"$trac_location/$name\">" . ucfirst($name) . "</a></li>\n";
  }
}

closedir(ROOT);

print "   </ul>\n";
print " </body>\n";
print "</html>\n";

__END__

Here you are ! Don't forget to chown these files to www-data, and it should work !


See also: TracGuide, TracInstall